RG-402SS Cable are flexible alternatives to semi-rigid coaxial cable, and the unique shielding configuration offers a cost effective, low attenuation. The use of silver plated spiral strip and silver plated copper round wire braid composite shields results in low transfer impedance levels. The 50 ohm constructions exhibit the same attenuation characteristics as the M17/133-RG405 cable.

  RG-405SS Cable have VSWR characteristics that meet or exceed similar size flexible constructions. RG-405SS have been designed with diameters over the outer braids of 086¡± respectively, so standard SMA connectors may be used.

     Construction

Item

Material

Diameter

Remark

Center Conductor

SPCW

0.51 mm  ( 0.0201 inch )

Solid

Dielectric

PTFE

1.63 mm  ( 0.064 inch )

Solid

Inner Shield

SPCS

1.80 mm  ( 0.071 inch )

Wrapping

Outer Shield

SPC

2.18 mm  ( 0.086 inch )

Braid

Jacket

FEP

2.64 mm  ( 0.104 inch )

Blue

     Electrical & Mechanical Data   

Characteristic impedance

50 ¥Ø

Operating frequency

20 GHz ( Max. )

Velocity of propagation

70  %

Signal delay

4.75 ns/m

Capacitance

96.5 pF/m

Operating temperature

- 55¡É ~  200¡É

Shield effectiveness

> -100 dB ( up to 18 GHz )

Working voltage

1,500 Vrms ( Max. )

Weight

19.1 kg / km 

Min. bending radius

6 mm ( single )

20 mm ( multiple )

  Attenuation

  Frequency

  Max. Attenuation

   (GHz)

(dB/m)

(dB/ft)

  1

0.75

0.229

  3

1.29

0.393

  5

1.71

0.521

10

2.56

0.780

15

3.22

0.981

18

3.57

1.088

20

3.80

1.158